http://ms.handyfaucet.com
Home > Produk-produk > Injap flush > Injap Flush Urinal > Automatic Wall-Mounted Infrared Control Flush Urinal

Automatic Wall-Mounted Infrared Control Flush Urinal

    Jenis bayaran: T/T,Paypal,Western Union
    Incoterm: FOB,CIF,EXW
    Pesanan minimum: 200 Set/Sets
    Masa penghantaran: 15 Hari
Maklumat asas

Model No.: HN-7G02

Permukaan Penamat: Chrome

Automatic Urinal Flush Valve: Automatic Flush Valve For Urinal

Additional Info

Pembungkusan: Standard export carton

Produktiviti: 20000pcs/month

Jenama: Handy

Pengangkutan: Ocean,Land,Air,LWE

Tempat asal: Jiangmen, Guangdong, China

Keupayaan bekalan: 10000pcs/month

Sijil: ISO9001:2015

Kod HS: 84818090

Port: SHEKOU,SHENZHEN,CHINA

Penerangan produk

Automatic Urinal Flush Valve Wall Mount Urinal Flushing System, wall-mounted concealed installation, automatic sensor inductive. Water discharge time delay 3-5 seconds, stainless steel chrome cover,overall dismention is 128mm×128mm.Concealed Urinal Flush Valve, dual inductive flushing method, sensor according to the using frequency of urinal intelligent water control, more effective avoid the waste of water resources (water pressure of 0.3 to 0.6 MPa).

Description of the Urinal flush valve

automatic flush valve


Name: Automatic urinal flush valve

Model No.: HN-7G02

Product Features:

CONDUCTIVE URINAL FLSH VALVE

  • Electronic flush valve with infrared induction principle for "hands free" operation
  • Adopt 2 times flushing water function design, sensitivity 100%, non-touch, flushing automatically.
  • Valve automatically switches to water conservation mode during periods of heavy usage.
  • Sensor &electronic controls are fully enclosed and water resistant.
  • Automatically flushes after 24 hours of non-use to maintain trap seal.
  • Low battery indicator.

  • Factory-installed 6V lithium battery included.

  • Battery can be changed without turning off the water.

  • Guarantee time: 1 year

Technical specification

Power

DC 6V (#7 lithium battery)

Power consumption in static

0.5MW / 2W

Detection Zone

Factory setting 50cm

Water pressure

0.05Mpa – 0.8Mpa

Ambient temperature

0 - 60

Diameter of inlet pipe

G1/2

How it is working:

When people closed to the sensor, about 50cm in front of this product, it accepts detection induction, automatically flush after 2 seconds, 3-second flushing delay first time, 7-second flushing delay second time.

flush urinal

Fields of applications: Install on Urinal in public toilet,toilet Flush Valve.

Automatic Inductive Urinal Flush Valve

Service conditions:
1) The working pressure of the product is 0.05MPa-0.8MPa
2) The working temperature is more than 0°

Attention before installation

1. Remove the impurities from water pipe, then connected to the inlet pipe of the machine.

2. Don`t erect it in the place under direct sunshine to avoid sensor performance degradation.

3. Don`t using non processing water or containing impurities water to prevent water flow from being affected.

4. Don`t water on the machine directly.

5. Because the infrared induction sensor complex, different clothes color, there is difference on induction distance, black is the nearest, white is the farthest.

6. There is a strainer in the inlet place. If flow become small, please turn off the adjust switch, take out strainer, clean and re-install it.

Kategori produk : Injap flush > Injap Flush Urinal

E-mel kepada pembekal ini
  • *Subjek:
  • *Mesej-mesej:
    Mesej anda mestilah antara watak-watak 20-8000
Berkomunikasi dengan pembekal?Pembekal
linly Ms. linly
Apa yang boleh saya lakukan untuk anda?
Sembang sekarang Hubungi pembekal